Ducati Diavel Owners Manual: Riding mode set indication
This function indicates the "riding style" set for the vehicle.
Three "riding modes" are available: sport, touring and urban.
Each riding mode can be changed using the "riding mode" function.
Note
The background of the riding mode (sport, touring or urban) is blue (1, fig. 26) If currently set riding mode parameters are the default ones (ducati factory setting) or yellow (2, fig. 27) If one or more parameters have been modified (customised) by means of the "riding mode" function of the setting menu.
Engaged gear indicator
This function displays the gears (1, fig. 25).
The instrument panel receives information and indicates the
engaged gear or "n" for neutral.
Note
In the case of a gear sensor "err ...
Indication if the lap function is active/not active
This function indicates if "lap" function (lap number) is
active.
When "lap" is not lit up, this means that the function has
been switched off.
The "lap" function ...
Other materials:
Recovery procedure in the event of hands free system fault
If the hands free system can no longer communicate with the other control
units over the can network (with the
dashboard or engine on), the following icon is shown on the tank dashboard:
The following image shows the icon appearing on the tank dashboard: this
indicates that the hands free sy ...
Changing and cleaning the air filters
The air filter must be replaced at the intervals described in the "scheduled
maintenance chart" (sect. 4 - 2).
Work on the vehicle right side, loosen screws (1) that secure the intake duct
(2) to the filter box, and the radiator
retaining screw (3); recover the washer (4).
Remove the in ...
Specific tools for the frame
88713.1072 Drift to install half bearing in bottom yoke
88713.2562 Chain assembly tool
88713.1058 Wrench for steering shaft nut
88713.1062 Tool for installing steering head bearings
88713.2951 Rear wheel balancing tool
88713.3211 Wrench for adjustment of the eccentric hu ...