This function resets the parameters set by ducati for each riding style.
To access the function it is necessary to view the "setting" menu page 48, using
button (1, fig. 14) ?"
" or (2, fig. 14) ?" " select the "riding mode"
function and press the
reset button (12, fig. 12) To go to next page.
Use button (1, fig. 14) ?" " or (2,
fig. 14) ?" " to select the riding
mode to be reset to default (initial) parameters and press the button (12, fig.
12) To access the next page. Now, using button (1, fig. 14) ?"
" or (2, fig. 14) ?" " select
"default" indication.
To restore original default parameters, press and hold the reset button (12, fig. 12) For 3 seconds.
For the parameter reset, approx. 3 Seconds are needed during which "please wait..." will appear on the display; at the end of the procedure, "default ok" will appear on the display to indicate that the parameters were reset.
Important
This procedure restores the parameters for all riding styles.
To exit the setting function, press the reset button (12, fig.
12) Where "exit" is highlighted.
Oil pump
Complete oil pump assembly
O-ring
Circlip
O-ring
Pump body
Circlip
Reducer bush
Spring washer
Screw
Screw
Spring washer
Pump drive gear
Key
By-pass plug
Locating bush
By-pass spring
By-pass valve
Spare parts catalogue
Diavel abs filters and oil pump
Diavel ...
Refitting the hands free
Reassembly is a reversal of the removal procedure: in particular apply
prescribed threadlocker to screws (2) and tighten
them to a torque of 20 nm +/- 10% (sect. 3 - 3, Frame torque settings).
If the hands free button has been previously removed, when refitting it insert
the spring (6) on pi ...
Deactivating the service indication on the dashboard
The message "serv" is displayed on the dashboard, indicating that the
motorcycle should be serviced in accordance with
the programmed maintenance plan. This indication is activated after the first
1000 km and thereafter at intervals of
12000 km.
After the scheduled service has been carried ...