Ducati Diavel Service Manual: Fuel tank
- fuel tank
- Rubber pad
- Spacer
- Screw
- Hose
- Tray
- Y-fitting
- Hose
- Hose
- Filler cap
- Screw
- Complete hose guide
- Screw
- Hose clip
- Hose
- Screw
- Screw
- Sealing washer
- Screw
- Flange
- Sealing washer
Spare parts catalogue
Diavel abs fuel tank
Diavel abs fuel system
Diavel carbon abs fuel tank
Diavel carbon abs fuel system
Important
Bold reference numbers in this section identify parts not shown in the figures alongside the text, but which can be found in the exploded view diagram.
- Removal of the fuel tank
- Removal of the fuel tank filler cap
- Refitting the filler cap
- Replacing the tank flange and fuel sensor
- Refitting the fuel tank flange
- Refitting the fuel tank
Removal of the fuel tank
On the usa version remove the canister filter as indicated in sect. 8 - 10,
"Removal of the evaporative emissions
canister".
Loosen and remove the front retaining screw (4)
Remove the f ...
Other materials:
Refitting the rear brake control
If the pushrod (18), clip (30) and fork (31) assembly has been dismantled,
reassemble it by screwing the nut (29) onto
the rod (18) and then screw the rod into the fork (31) to obtain the measurement
indicated in the figure.
Block the rod and tighten to a torque of 7.5 Nm +/- 10% (sect. 3 - ...
Lap registration function
This function describes the "lap" time registration.
If the function is activated (see "lap activation/deactivation description), the
lap time can be registered as follows:
pressing the flash headlight button (6) the first time starts the "lap timer"
for the first lap, and the dashboard show ...
Gear change pedal
When released, the gear change pedal (1, fig. 96)
Automatically returns to rest position n in the centre. This is
indicated by the instrument panel light n (2, fig. 4) Coming on.
The pedal can be moved:
down = press down the pedal to engage the 1st gear and to
shift down. At this point the n ...