Ducati Diavel
Free Service and Repair manuals

Ducati Diavel Owners Manual: Immobilizer override procedure

Ducati Diavel Owners Manual / Instrument panel (dashboard) / Immobilizer override procedure

This procedure makes it possible to "temporarily" turn on the motorcycle if the hf (hands free) system is not working.

Note


The pin code function must be activated by entering your 4 digit pin in the instrument panel, otherwise the vehicle cannot be turned on temporarily in the case of a malfunction.

Warning


The motorcycle owner must activate (store) the pin code; if there is already a stored pin, contact an authorised ducati dealer to have the function "reset". To perform this procedure, the authorised ducati dealer may ask you to demonstrate that you are the owner of the motorcycle.

Pin code activation function

To access the function it is necessary to view the "settin"h menu page 48, using button (1, fig. 14) ?" " or (2,
fig. 14) ?" " select
the "pin code" function and press the reset button (12, fig. 12) To go to next page.

Note


If "modify pin code" appears when accessing this function, this means that there is already a stored pin and therefore the function is already active.

When accessing the function, "insert new pin code" with four dashes "- - - -" in the bottom line will appear on the display highlighted in green; now enter a 4 digit code.

Entering the code: press the reset button (12, fig. 12); Each time you press the button (2, fig. 14) ?"
" the displayed number increases from "0" to "9" and then returns to "0"; to confirm the number, press the reset button (12, fig. 12).

Repeat the procedure until inserting the fourth digit.

To highlight the "memory" indication, press the reset button (12, fig. 12) Again.

To store the entered pin, press the reset button (12, fig. 12) For 3 seconds with "memory" indication highlighted in green.

As a confirmation of pin storage, the display will show the message "memorized" for about 2 seconds and then automatically highlight "exit" option.

From this moment, "modify pin code" will be displayed when accessing the "pin code" function and the pin can be changed again as many times as necessary (without limits).

To exit the setting function, press the reset button (12, fig.

12) When "exit"is highlighted.

Immobilizer override procedure


Pin code change function

This function changes your four number pin code.

To access the function it is necessary to view the "setting" menu page 48, using button (1, fig. 14) ?" " or (2, fig.
14) ?" " select
the "pin code" function and press the reset button (12, fig. 12) To go to next page.

Note


If "insert new pin code" and the dashes "- - - -" appear when accessing this function, this means that the function was not active as the pin code was never entered.

Enter your pin as described in the previous paragraph "pin code activation function".

When accessing the function, "modify pin code", "old pin" with four dashes "- - - -" in the bottom line will appear on the display highlighted in green; now enter the 4 digit code.

Note


To change the pin, you must know the currently stored pin.

Now you shall enter the "old" pin code (old pin).

Press the reset button (12, fig. 12); Each time you press the button (2, fig. 14) ?" " the displayed number increases from
"0" to "9" and then returns to "0"; to confirm the number, press the reset button (12, fig. 12); Repeat the procedure until inserting the fourth digit; press the reset button (12, fig. 12) Again to confirm.

If the entered code is incorrect, the instrument panel will return to the four dashes " - - - - " in order to enter the code again.

If the entered code is correct, "correct" is automatically highlighted in green for about 2 seconds and then the four dashes " - - - - " next to "new pin" indication are automatically highlighted; now enter the "new" 4 digit code.

Press the reset button (12, fig. 12); Each time you press the button (2, fig. 14) ?"" the displayed
number increases from "0" to "9" and then returns to "0"; to confirm the number, press the reset button (12, fig. 12); Repeat the procedure until inserting the fourth digit; press the reset button (12, fig. 12) Again to confirm.

Item "memory" is automatically highlighted.

To store the entered new pin, press the reset button (12, fig.

12) For 3 seconds with "memory" indication highlighted in green.

As a confirmation of the new pin storage, the display will show message "memorized" for about 2 seconds and then "exit" is automatically highlighted.

To exit the setting function, press the reset button (12, fig.

12) When "exit" is highlighted.

Note


There is no limit to the amount of times you can change your pin code.

Pin code change function


Duplicate keys
If you need any duplicate keys, contact the ducati service network with all the keys you have left. The ducati service centre will program all the new keys as well as any keys you already have. ...

Light control
...

Other materials:

Adjusting the position of the gearchange and rear brake pedals
The position of the gearchange and rear brake pedals in relation to the footrests can be adjusted to suit the requirements of the rider. Adjust the pedals as follows: Gear change pedal (fig. 97) Hold the linkage (1) and slacken the lock nuts (2) and (3). Note Nut (2) has a left-hand thr ...

Refitting the primary drive gears and checking backlash
Fully degrease the crankshaft splined end and the corresponding spline on the primary drive gear. Position the spacer (c) onto the crankshaft. Fit the driving gear (b) onto the crankshaft with the oil pump drive sprocket facing the crankcase. Temporarily secure the gear with the was ...

Transmission
Wet clutch controlled by the lever on left-hand side of the handlebar. Transmission from engine to gearbox primary shaft via spur gears. Front chain sprocket/clutch gearwheel ratio: 33/61 6-speed gearbox with constant mesh gears, gear change pedal on left side of motorcycle. Gearbox ou ...

2024 | www.dudiavel.com |