Ducati Diavel
Free Service and Repair manuals

Ducati Diavel Owners Manual: Suspensions

Front

Hydraulic upside-down fork provided with external adjusters for rebound and compression damping and preload (for inner springs of fork legs).

Stanchion diameter: 50 mm, coated.

Rear wheel travel: 120 mm

Rear

The shock absorber is adjustable for rebound and compression, with remote control for spring preload and is adjustable. Its upper section is pivot connected to the frame and the lower section is pivot connected to a light alloy single-sided swingarm. The swingarm hinges on a pivot shaft that passes through the frame and engine.

This system gives the motorcycle excellent stability.

Shock absorber stroke: 59.5 Mm.

Rear wheel travel: 120 mm

Transmission
Wet clutch controlled by the lever on left-hand side of the handlebar. Transmission from engine to gearbox primary shaft via spur gears. Front chain sprocket/clutch gearwheel ratio: 33/61 6- ...

Exhaust system
Equipped with catalytic converter in compliance with euro 3 emission regulations. One-piece stainless steel silencer with aluminium terminals. Catalytic converter built into the silencer and la ...

Other materials:

Alternator
It is equipped with a 12 v, 430 w generator, consisting of a fixed element (stator, a) located on the generator cover and of a movable element (rotor, b) fixed to the crankshaft. Note To check the battery charging system for faults, use the dds diagnosis instrument and follow the instruct ...

Testing the battery charging system
Note The on-screen icons used during this procedure are explained in a table at the end of this section. You can determine the engine rpm required for generator to produce just enough current to charge battery, feed the injection ignition system and all electric items fitted to motorcycle. Wh ...

Removal of the timing belt covers
Loosen the screws (4) securing the central external cover (1) and remove it from the central side. Undo the fixing screws (4) of the external cover (25) and remove it from the vertical thermal unit. Undo the fixing screws (4) of the external cover (3) and remove it from the horizonta ...

2022 | www.dudiavel.com |