Ducati Diavel Service Manual: System components
- Screw
- Abs front speed sensor
- Sealing washer
- Hose grommet
- Abs rear speed sensor
- Abs control unit
- Front pump - control unit pipe
- Control unit - front callipers pipe
- Rear pump - control unit pipe
- Control unit - rear calliper pipe
- Sealing washer
- Support
- Spacer
- Rubber mounting
- Screw
- Special screw
- Cable grommet
- cable grommet
- Screw
- Washer
- Vibration damper mount
- Screw
- screw
Spare parts catalogue
Diavel abs antilock braking system (abs)
Diavel carbon abs antilock braking system (abs)
Important
Bold reference numbers in this section identify parts not shown in the figures alongside the text, but which can be found in the exploded view diagram.
- Replacing the front phonic wheel sensor
- Replacing the rear phonic wheel sensor
- Removing of the abs control unit
- Refitting the abs control unit
- Flexible wiring/hoses positioning
Abs system deactivation
Carry out the procedure described in section sec. 6 - 7, Abs disabling
function.
Warning
If the vehicle front wheel remains off the ground for a prolonged
period while the vehicle is in motion, ...
Replacing the front phonic wheel sensor
Disconnect the front abs sensor (2) connector (a) from the main electric
wiring.
Open all the retainer clamps of the front abs sensor cable (2): refer to table
of sect. 7 - 6, Flexible wiri ...
Other materials:
Reassembly of the control unit
Insert the control unit (4) into the protecting sheath (5) and position it on
the airbox.
Position the relay supporting bracket (2) by starting and tightening the
screws (1) to a torque of 6 nm +/- 10% (sect. 3 -
3, Frame torque settings), and connect the control unit connectors (3).
...
Refitting the brake disks
Before refitting the brake disc to the wheel, clean all contact surfaces
thoroughly and smear a medium strength
threadlocker on the threads of retaining screws (5).
Operating on the left side, fit the phonic wheel (6).
Tighten the fixing screws (5) of the brake disk (7) to the wheel followi ...
Tips for use on the road
Activate the dtc, select level 8 and ride the motorcycle in
your usual style; if the level of dtc intervention seems
excessive, try reducing the setting to levels 7, 6, etc., Until
you find the level that suits you best.
If changes in the grip conditions and/or circuit characteristics
and/or ...