Ducati Diavel
Free Service and Repair manuals

Ducati Diavel Service Manual: Throttle valve position sensor

Introduction

The throttle valve position sensor (tps) of the diavel is mounted on the throttle body.

Accelerator position sensor (throttle grip)
Introduction An accelerator position sensor (aps) is mounted on the throttle body of the diavel, which measures the degree of aperture of the throttle grip. The throttle grip is connected to t ...

Component assembling position
The throttle valve position sensor is integrated in the throttle valve actuator motor. Location of electric connection for throttle valve actuator motor - tps (throttle valve position sen ...

Other materials:

Valves - rocker arms
Closing rocker arm shaft Opening rocker arm shaft Opening rocker arm Closing rocker arm (left) Valve opening shim Half rings Valve closing shim Sealing ring Valve guide Exhaust valve seat Exhaust valve Plug Intake valve seat Intake valve Aluminium gasket Closing ...

General maintenance indications
Useful tips Ducati recommends that you follow the instructions below in order to prevent problems and obtain the best end result: When diagnosing faults, primary consideration should always be given to what the customer reports about motorcycle operation since this information can highli ...

Reassembly of the crankcase halves
The crankcase halves must be in good condition and perfectly clean. The mating surfaces must be perfectly flat and free from burrs. Overhauling the alternator-side crankcase half The following parts must be present on the internal side of the crankcase half: Gearbox secondary shaft bearin ...

2022 | www.dudiavel.com |