Ducati Diavel
Free Service and Repair manuals

Ducati Diavel Service Manual: Tips on how to select the sensitivity level

Warning

The 8 level settings of the dtc were calibrated using tyres of the same make, model and size as those originally fitted to the motorcycle.

The use of tyres of different size to the original tyres may alter the operating characteristics of the system.

In the case of minor differences, such as for example, tyres of a different make and/or model than the original, but with the same dimensions (rear = 240/45-17; front = 120/70-17), it may be sufficient to simply select the most suitable level setting from those available to restore optimal system operation.

If tyres of a different size class are used or if the tyre dimensions differ significantly from the original tyres, it may be that the system operation is affected to the point where none of the 8 available level settings will give satisfactory results.

In this case is it is advisable to deactivate the traction control system.

If level 8 is selected, the dtc control unit will kick in at the slightest hint that the rear wheel is starting to spin.

Between level 8 and level 1 there are a further 6 intermediate levels. The level of dtc intervention decreases in equal steps from level 8 to level 1.

Level 1 allows considerable spinning and requires constant and good grip to operate correctly; level 1 is thus recommended for expert users only and with excellent road conditions.

The choice of the correct level depends on 3 main variables:

  1. The grip (type of tyre, amount of tyre wear, the road/track surface, weather conditions, etc.)
  2. The characteristics of the path/circuit (bends all taken at similar speeds or at very different speeds)
  3. The riding style (whether the rider has a "smooth" or a "rough" style)

The relation of the dtc intervention level to grip conditions: the choice of level setting depends greatly on the grip conditions of the track/circuit (see below, tips for use on the track and on the road).

The relation of the dtc intervention level to the circuit characteristics: if all the corners on the track/circuit can be taken at a similar speed, it will be easier to find an intervention level that is satisfactory for every bend; on the other hand, if the track has, for example, one corner that is much slower than all the others, it will necessary to find a compromise level (on the slow corner the dtc will tend to control more than on the faster corners).

The relation of the dtc intervention level to riding style: the dtc will tend to kick in more with a "smooth" riding style, where the bike is leaned over further, rather than with a "rough" style, where the bike is straightened up as quickly as possible when exiting a turn.

Tips for use on the track

We recommend level 8 be used for a couple of full laps (to allow the tyres to warm up) in order to get used to the system. Then try levels 7, 6, etc., In succession until you identify the dtc intervention level that suits you best (always try each level for at least two laps to allow the tyres to warm up).

Once you have found a satisfactory setting for all the corners except one or two slow ones, where the system tends to kick in and control too much, you can try to modify your riding style slightly to a more "rough" approach to cornering i.E.

Straighten up more rapidly on exiting the corner, instead of immediately trying a different level setting.

Tips for use on the road

Activate the dtc, select level 8 and ride the motorcycle in your usual style; if the level of dtc intervention seems excessive, try reducing the setting to levels 7, 6, etc., Until you find the level that suits you best.

If changes in the grip conditions and/or circuit characteristics and/or your riding style, and the level setting is no longer suitable, switch to the next level up or down and proceed as described above to determine the best setting (e.G. If with level 7 the dtc intervention seems excessive, switch to level 6; alternatively, if on level 7 you cannot perceive any dtc intervention, switch to level 8).

Dtc (ducati traction control) setting function
This function allows you to customise the level of dtc intervention (ducati traction control) or disable it for every riding mode. To access the function it is necessary to view the ""setting" m ...

Engine setting function (engine power control)
This function customises engine power and output. To access the function it is necessary to view the ""setting" menu", using buttons (1) "s" or (2) "t" select the "riding mode" function and pres ...

Other materials:

Abs disabling function
This function disables or enables the abs. To access the function it is necessary to view the ""setting" menu", using buttons (1) "s" or (2) "t" to select the "abs" function and press the reset button (3) to enter the following page. Function state is highlighted on the display (on in green ...

Gear indicator display on dashboard shows dashes, engaged gear not displayed correctly, idle speed irregular with gearbox in neutral
Fault codes Dds: gear sensor diagnosis -> short circuit to ground or open circuit (s.C. Gnd or c.O.) - Short circuit to vdc (s.C. Vdc) - congruence (generic error - signal not correct). Dashboard: the error "gear sensor" is shown on the service display. The eobd warning light activates. ...

Rh switch
Red on/off switch. Black engine start button. The switch (1) has three positions: Centre: run off. In this position, the engine cannot be started and all electronic devices are off. Pushed down: on/off. In this position, the system can be turned on (key-on) and off (key-off). Pus ...

2024 | www.dudiavel.com |