In your own interest, and in order to guarantee product reliability, you are strongly advised to refer to a ducati dealer or authorised service centre for servicing that requires any particular technical expertise.
Our highly skilled staff have the tools required to perform any servicing job to the highest professional standards, using only ducati original spare parts to ensure full interchangeability, smooth running and long life.
All ducati motorcycles come with a warranty booklet.
However, the warranty does not apply to motorcycles used in competitions. If any motorcycle part is tampered with, modified, or replaced with parts other than original ducati spare parts during the warranty period, the warranty is automatically invalidated.
SymbolsRemoval of the swingarm
Before removing the parts in question, you must first carry out the following
operations:
Remove the rear wheel eccentric hub as described in chapter "removal of the
rear wheel eccentric hub and rear wheel
shaft" of this section.
Loosen screws (7) and remove the hose grommets (13), (15) ...
Refitting the swingarm
Apply the recommended threadlocker to the screws (7).
Install the lower chain guard (15) on the swingarm (8), fastening it with the
screws (7): tighten the screws (7) to a torque
of 4 nm +/- 10% (sect. 3 - 3, Frame torque settings).
Locate the swingarm (8) on the frame.
Lubricate with ...
Removal of the gearchange control
Loosen and remove the pivot screw (4) securing the gearchange pedal (1) and
recover the washer (9) and the o-ring Seals (5).
Loosen and remove the screw (7) securing the gearchange lever (8) to the gear
selector shaft.
Withdraw the lever (8) complete with the gearchange control assem ...