Ducati Diavel Owners Manual: Instrument panel (dashboard)
The vehicle is equipped with two instrument panels: an lcd (1, fig. 3) Located on the handlebar containing the key indications (speed, rpm, coolant temperature and clock) and a tft colour display (2, fig. 3) Located in the tank fairing displaying trip information (riding style set, odometer, consumption, average speed, etc.) And the setting menu for activating and setting the various functions.
- Instrument panel on handlebar
- Lcd unit functions
- Vehicle speed indicator
- Engine rpm indicator (rpm)
- Clock
- Coolant temperature
- Display background colour (automatic adjustment)
- Instrument panel on tank
- Tft - parameter setting/display
- Total distance covered indicator: "odometer"
- Trip 1 meter
- Trip 2 meter
- Distance travelled on fuel reserve: trip fuel
- Indicator cons. Avg - average fuel consumption
- Indicator cons. - Instantaneous fuel consumption
- Indicator speed avg - average speed
- Indicator trip time - trip time
- Indicator air - air temperature
- Engaged gear indicator
- Riding mode set indication
- Indication if the lap function is active/not active
- Riding style function (riding style change)
- Maintenance indicator
- Residual range indication when the service is due
- Indication of range reached for service
- Warning indication (alarms/signals)
- Low battery level
- Traction control (dtc) deactivated
- Hands free key (hf) not recognised
- Low hands free key (hf) battery level
- High engine coolant temperature
- Steering release error - steering still locked
- Instrument panel diagnosis
- Setting menu
- Riding mode customisation
- Dtc (ducati traction control) setting function
- Engine setting function (engine power control)
- Default function (resetting ducati default parameters)
- Menu 2 on/off function
- Background setting function for the instrument panel on tank - dashboard 1
- Backlighting setting function for the instrument panel on Handlebar - dashboard 2
- Digital rpm indication function
- Lap activation/deactivation function (lap time)
- Lap registration function
- Stored lap display function
- Stored lap erase function
- Battery voltage indicator (battery)
- Clock setting function
- Units of measurement modification function
- Abs disabling function
- The immobilizer system
- Keys (fig. 62)
- Replacing the battery in the active key
- Duplicate keys
- Immobilizer override procedure
- Light control
Identification data
All ducati motorcycles have two identification numbers, for
frame (fig. 1) And engine (fig. 2).
Note
These numbers indicate the motorcycle model and
should be quoted when ordering spare parts. ...
Instrument panel on handlebar
Lcd.
Neutral light n (green). Illuminates when the gearbox is in neutral.
High beam light (blue).
It turns on to indicate that the high beam lights are on.
Engine oil pressure light ...
Other materials:
Removing of the abs control unit
Drain the hydraulic fluid that is inside the front and rear braking system
tubes by disconnecting them from the master
cylinder and the calliper (sect. 4 -3, Changing the brake fluid).
Disconnect the connector (a) of the abs control unit (6).
Loosen the screws (16) that retain the abs ...
Engine temperature sensor
Introduction
The engine control system on the diavel uses a sensor that measures the
temperature of the coolant (engine
temperature). This sensor has a resistance of ntc type (negative temperature
coefficient), that reduces its own value
when the temperature increases. The engine temperature ...
Checking valve clearances
To check the valves clearance, it is necessary to have access to the cylinder
head covers and then remove the
components listed below.
Unscrew the two fixing screws (1) of the cover (2) according to the
crankshaft.
Fit the tool handgrip 88713.0123 In the holes of the generator cover t ...